Welcome Guest [Log In] [Register]

Notice
This is a top secret board, authorized personnel only!
Error
This is a top secret board, authorized personnel only!
Add Reply
Cause when installing wood flooring to leave gap
Topic Started: Jun 29 2015, 03:24 PM (4 Views)
wei2xian


<p>Wood floor in our lives is widely used, the installation of the floor what steps it? There are wood floors Why should leave a gap when installing it? Here's a right answer to this question! timberwolf composite fence pricing</p>

<p>1. Under normal conditions, when the WPC (WPC) profile equipment joist span of 30-50 cm (depending on the size of the profile may be).
2. Self-tapping screws durability, is the preferred device profiles WPC (WPC).
When using special screws 3. equipment necessary prior drilling. Pre-drilling diameter should be less than 3/4 straight nail or screw diameter.
4. When the profile width greater than 10mm, each end should be two screws.
In particularly the use of the environment or extraordinary load conditions - such as hot water bath - it may require a shorter distance equipment. solid stained concrete front porch</p>

<p> Why WPC equipment division to stay the gap? Many owners are not particularly understand this, in view of this situation, we come together to discuss the reason under the meantime, if you have some additional ideas, anyway, and we exchange under.
The officer told us that, in the apparatus of the division is required to stay WPC gap, the primary purpose of doing so is to the following elements:
1, drain;
2, minor swelling and shorten the heat;
Referrals reading: wood molding skills of selection and disposal of wood flour
3, cleaning;
Although wood is not due to the humid environment and the occurrence of swelling and shorten monotonous, but according to temperature changes and have a certain degree of swelling and shorten, thus side-to-side and head-to-head left vacancy is necessary, particularly It blooms in winter equipment. putting pavers over porch</p>
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Rebound 2 · Next Topic »
Add Reply