| Great floor maintenance; wpc deck | |
|---|---|
| Tweet Topic Started: May 31 2017, 12:00 PM (2 Views) | |
| qzz10011 | May 31 2017, 12:00 PM Post #1 |
|
<p>non-standard operation is mainly embodied in the keel fixed firmly; material failure is mainly reflected in the keel without drying. In addition, some decoration construction units used without drying keel construction, the surface has traces of drying, in fact, did not dry. Again, acceptance of the floor deformation, warping, acceptance of the method is to use a 2 meters long, on the floor, roughness should be less than 3 mm, many take several measurement, if the </p> <p>pass rate in more than 80% as qualified, otherwise it is not qualified. Sometimes we will also find that the local arch of the floor, for solid wood flooring, may be due to the shop too tight or the floor is too dry (moisture content is too low), but for solid wood composite floor, it must be poor quality of the floor. China flooring network once again reminded consumers, the floor arch is a serious quality problems. Finally, check whether the surface of the floor has eyes, </p> <p>cracks and scratches: the more common is due to the keel without treatment, there are insects inside. If that is not timely, and found a decayed eye, the floor has been decayed almost. Cracks and scratches can be seen directly with the naked eye. But for the floor scratches, the state expressly provides: solid wood composite floor gap should not be greater than 0.5 mm; scratches are mainly caused by rough decoration; if the wax method can not be repaired, it </p> <p>composite deck boards fence<br /> decking for pontoon boats<br /> low priced composite decking</p> |
| wholesale composite deck boards - buy from china | |
![]() |
|
| 1 user reading this topic (1 Guest and 0 Anonymous) | |
| « Previous Topic · [#1] Experiment · Next Topic » |






12:57 AM Jul 11