Welcome Guest [Log In] [Register]
Welcome to Altezza Club Of NZ/Australia. We hope you enjoy your visit.


You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.

http://s4.zetaboards.com/lexusaltezzaclub/topic/1148393/1/#new



Username:   Password:
Add Reply
Whiteline sways bars; Specs & group buy
Topic Started: Jan 21 2005, 02:42 AM (969 Views)
FLEX
Member Avatar
Sleeper
[ *  *  *  *  *  * ]
Had the car in today for quick measure up. They initially under-quoted until they had a look at the car in detail.

these are the specs ... (based on IS200 GXE10R)

FRONT sway 22mm (hollowed)
REAR sway 13mm

Whiteline recommends

FRONT sway 22mm (solid)
REAR sway 18/20mm or either REAR sway adjustable 18/20mm

I had no idea what adjustable sways were until today ! :D
apparently you are able to adjust the setting (hole) so that you are able to gain a little more understeer. Of course, everyone has a different driving style ... so adjust to suit.

Prices

MEMBERS PRICE
FRONT - $193.80
REAR - $155.55
REAR ADJUSTABLES - $219.30

NON MEMBERS PRICE (off the street)
FRONT - $228.00
REAR - $183.00
REAR ADJUSTABLES - $258.00


of course, these do come with polyurethane bushes (yellow) and installation (roughly 40mins for front & rear)
Only downside to this is that we have to wait anywhere from 2-6 weeks for them to make and test the bushes ...

I will be getting a set nevertheless.
Can i get a FIRM number of those keen on these ..??
Posted Image
Offline Profile Quote Post Goto Top
 
frylai
ACNZ Old Boys Association
[ *  *  *  *  * ]
Damn!!! The prices are far more than what we expected!!! =( will need to do some calculations first!

Matt =)
06 IS250 Prestige (Black/Grey) with Moonroof
Offline Profile Quote Post Goto Top
 
Cashfree
Lowered
[ *  *  * ]
FLEX,Jan 21 2005
02:42 AM

these are the specs ... (based on IS200 GXE10R)

Most of us here has Rs200z's... would it be suitable for our cars to increasing handling? Sorry if its a dumb question. I am still interested.
Offline Profile Quote Post Goto Top
 
LEX-SIE
Lowered
[ *  *  * ]
I'm interested but it depends when we getting them.

Offline Profile Quote Post Goto Top
 
FLEX
Member Avatar
Sleeper
[ *  *  *  *  *  * ]
preferably asap ...
price is a little off from what was originally quoted, but then again - they werent aware of the setup the IS had compare to say .. the Soarer or Celica

in regards to the RS - Im assuming all altezzas / RS / IS / 200 / 300 share a common chassis. so in saying that it woudl fit. I could be wrong...

doe anyone have any confirmed info on the differences between the IS & RS ..?
Posted Image
Offline Profile Quote Post Goto Top
 
frylai
ACNZ Old Boys Association
[ *  *  *  *  * ]
they will all fit, regardless of engine or specs...

Matt =)
06 IS250 Prestige (Black/Grey) with Moonroof
Offline Profile Quote Post Goto Top
 
altezzascott
Member Avatar
Soccer Mom
[ * ]
FLEX,Jan 21 2005
03:18 PM
preferably asap ...
price is a little off from what was originally quoted, but then again - they werent aware of the setup the IS had compare to say .. the Soarer or Celica

in regards to the RS - Im assuming all altezzas / RS / IS / 200 / 300 share a common chassis. so in saying that it woudl fit. I could be wrong...

doe anyone have any confirmed info on the differences between the IS & RS ..?

they will fit the tez no problem Joe
Offline Profile Quote Post Goto Top
 
Cashfree
Lowered
[ *  *  * ]
Anyone updating for the NZ peops? I heard we're not getting them anymore?
Offline Profile Quote Post Goto Top
 
lextcy
Member Avatar
Sydney, IS300
[ *  *  *  * ]
hey joe, how about a review on these?
Offline Profile Quote Post Goto Top
 
SSML
Member Avatar
Custom
[ *  *  *  *  * ]
Any update on this topic?

Who has these sways fitted??
02 IS200 Lux6MT BneAus
2008 addition: DIY job:DBA 4000series x-drilled rotors + bendix pads :D
Offline Profile Quote Post Goto Top
 
SenDog
Member Avatar
Custom
[ *  *  *  *  * ]
Any other info on this? I would like to get a rear swaybar
Offline Profile Quote Post Goto Top
 
Brian_J
Member Avatar
Sleeper
[ *  *  *  *  *  * ]
im not sure whether whiteline have a manufacturing line for lexus products simply because not many people buy them. enquire with your local whiteline stockist to make sure i guess. the other (slightly more expensive) option would be to go with japanese products. there are many out there!
2001 IS200 6MT
Posted Image
Offline Profile Quote Post Goto Top
 
beerbaron
Sleeper
[ *  *  *  *  *  * ]
better off getting the TRD or TTE sway bars
Offline Profile Quote Post Goto Top
 
greeneyes
Member Avatar
Targa Master
[ *  *  *  *  *  *  *  *  * ]
I have the Cusco rear listed here, which makes a very nice difference, but would love the rear Hotchkiss!!! :woot:


http://forum.altezzaclub.org.au/index.php?showtopic=153
The Girl's KE70-
http://www.rollaclub.com/board/topic/42407-the-girls-ke70/
How NOT to build a rally car-
http://www.rollaclub.com/board/topic/64027...ld-a-rally-car/
Offline Profile Quote Post Goto Top
 
SenDog
Member Avatar
Custom
[ *  *  *  *  * ]
Thanks for the info, will definitely keep it in mind ...
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Group Buys · Next Topic »
Add Reply