Welcome Guest [Log In] [Register]
Welcome to Altezza Club Of NZ/Australia. We hope you enjoy your visit.


You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.

http://s4.zetaboards.com/lexusaltezzaclub/topic/1148393/1/#new



Username:   Password:
Add Reply
Light Bulb Size Chart
Topic Started: May 17 2006, 11:36 PM (29,198 Views)
xnickx
Member Avatar
^^ You may thank me ^^
[ *  *  *  *  *  *  *  *  * ]
Hope this following information helps others as I found it hard myself to find the codes so compiled a chart of aftermarket and genuine part numbers

Low beam headlamp
(HID D2R Lexus factory option)
9006 HB4
Genuine - 90981-13047
12V 51W

High beam headlamp
9005 HB3
Genuine - 90080-81041
12V 65W

Park lights
Capless, single filament
168 T10 (wedge) aka B501
Genuine - 99132-12050
12V 5W

Rear Indicator Bulb (Orange Bulb)
Metal capped, single filament
1156A - aka B382
Genuine - 90981-15009
12V 21W

Brake Light light (fogs)
Capless dual filament
7443 - aka W7875
Genuine - 90981-11048
12V 21W/5W

Inner Fog/Brake Lamps
(Lexus are single filament, Altezza are dual filament)
7443 - AKA W7875
7440 - AKA W7575
Genuine - 90981-13044
Genuine - 90981-13043
12V 21/5W or 12V 21W

Third brakelight
921 - aka B1221
Genuine - 90981-11059
12V 18W

Fog/Driving light (all the same as low beam lights)
1998-2002 = 9006 HB4 (Genuine - 90981-13047)12V 51W
2002-2005 = H3 (Genuine - 90981-13071) 12V 55W

License plate
168 T10 (wedge) aka B501
Genuine - 99132-12050
12V 5W

Reverse light
Capless Single Filament
7440 - AKA W7575
Genuine - 90981-13043
12V 21W

Front Indicator
Capless single filament
168 T5 (wedge) aka W7575
Genuine - 90981-13043
12V 21W

Glove box
37
Genuine - 90981-11018
12V 1.2W

Dome light
DE3175
Genuine - 90981-14011
12V 8W

Step/Courtesy light
194
DE3021
Genuine - 90981-11020
12V 3.8W

Trunk/Boot area
194 AKA B501 (T10)
Genuine - 90981-11020
12V 3.8W

Front Ash Tray
Genuine - 90981-11014
14V 1.4W
Contacting me for parts

Posted Image

Posted Image
Offline Profile Quote Post Goto Top
 
cpufix
Member Avatar
Paraparaumu, Wellington
[ *  *  *  *  *  * ]
Good work xnickx, does the chart only apply to Altezza and which models.
Offline Profile Quote Post Goto Top
 
xnickx
Member Avatar
^^ You may thank me ^^
[ *  *  *  *  *  *  *  *  * ]
For all Altezzas and also Lexus IS200s (only difference being the optional HID lights).
Contacting me for parts

Posted Image

Posted Image
Offline Profile Quote Post Goto Top
 
-DC-
Member Avatar
Custom
[ *  *  *  *  * ]
Just found out today (after alfred from speedfactory popped by) is that the gita wagon uses a "W16W" bulb for a reverse light instead of a 7440 bulb (which I believe is also known as a T20 bulb)

So far results on google show the more common name for the "W16W" bulb as "921" :)

<edit> update: turns out they are also the "T15" bulb :) </edit>
Offline Profile Quote Post Goto Top
 
wesley
Member Avatar
touge lover
[ *  *  *  *  *  *  * ]
ok on lexus IS200/IS300 or altezza equipped with rear fogs the bulb is not 7443 but 7440 and for I think later model front fog lights they are H3 not HB4

2003 IS200 Sport Luxury 4AT SOLD
2002 WRX STI V7 6MT SOLD
2000 Zenki RS200 Z Etd 6MT SOLD
1999 Zenki RS200 Z Etd 6MT SOLD - Wakefield Park P.B. 1:16.1
2006 BMW 130i 6MT RIP
2002 Integra Type R 6MT - Wakefield Park P.B 1:13.9
Offline Profile Quote Post Goto Top
 
lexism
Member Avatar
FMWG!
[ *  *  *  *  *  * ]
Anyone know what kinda bulb the ashtray uses, its yellow and ugly and needs to be a white led!
My nightmares consist of potholes and speed bumps.
Offline Profile Quote Post Goto Top
 
JohnnyGT
Member Avatar
Body-Kitted
[ *  *  *  * ]
Front ashtray 12V1.4W
Posted Image
Offline Profile Quote Post Goto Top
 
lexism
Member Avatar
FMWG!
[ *  *  *  *  *  * ]
JohnnyGT,Apr 2 2008
02:46 PM
Front ashtray 12V1.4W

Is that equiv to a t5 bulb? (same as glovebox)
My nightmares consist of potholes and speed bumps.
Offline Profile Quote Post Goto Top
 
-DC-
Member Avatar
Custom
[ *  *  *  *  * ]
12V1.4W just says the voltage and the wattage of the light and not the size...... although it might be a T5?

why is this thread not stickied yet?? :o
Offline Profile Quote Post Goto Top
 
Gareth
Lowered
[ *  *  * ]
Just thinking this might be worth stickying =)
Offline Profile Quote Post Goto Top
 
xnickx
Member Avatar
^^ You may thank me ^^
[ *  *  *  *  *  *  *  *  * ]
-DC-,Jul 3 2008
07:00 PM
why is this thread not stickied yet?? :o

Gareth Posted on Aug 18 2008
02:11 PM

Just thinking this might be worth stickying =)


LOL ok ok Pinned now k :ph43r:

Also added wattages and genuine part numbers today too
Contacting me for parts

Posted Image

Posted Image
Offline Profile Quote Post Goto Top
 
Gareth
Lowered
[ *  *  * ]
Haha, cher bo!
Offline Profile Quote Post Goto Top
 
sydneyis200
Member Avatar
TTE Whore
[ *  *  *  *  *  * ]
xnickx,May 17 2006
11:36 PM
Front Indicator
Capless single filament
168 T5 (wedge) aka W7575
Genuine - 90981-13043
12V 21W

Are these T5 bulbs for the indicator bulb inside the headlight?
Posted Image

Offline Profile Quote Post Goto Top
 
-DC-
Member Avatar
Custom
[ *  *  *  *  * ]
front headlight indicator bulb is T20 / 7440 i think
Offline Profile Quote Post Goto Top
 
xnickx
Member Avatar
^^ You may thank me ^^
[ *  *  *  *  *  *  *  *  * ]
Is like the same one in our stop/tail but its just single fillament, just a large capless bulb
Contacting me for parts

Posted Image

Posted Image
Offline Profile Quote Post Goto Top
 
Stephen
Member Avatar
Altezza Club of Australia
[ *  *  *  *  *  *  *  *  * ]
For the rear brake lamps, you will need T20 fitment. These are the "large" wedge bulbs.

T10 are the smaller wedge bulbs used in the indicators, front parking and number plate lamps.

T15 are larger than T10s. I believe we don't use T15s in our cars.
Posted Image
Offline Profile Quote Post Goto Top
 
sslc
Stock
[ *  * ]
Hi,
Sorry, What I was meant to ask was what we use for the rear center (spoiler) tail brake light.
I unscrewed the housing from the rear spoiler tail and it looks some what like LED lights but as a long bar on a chipset.

I can't replace this with bulbs.. guess I would need a completely new tail unit?
Offline Profile Quote Post Goto Top
 
Stephen
Member Avatar
Altezza Club of Australia
[ *  *  *  *  *  *  *  *  * ]
The individual spoiler LEDs are not meant to be replaceable - but rather as a complete unit. It is probably possible to solder in a replacement onto the circuit board.
Posted Image
Offline Profile Quote Post Goto Top
 
sslc
Stock
[ *  * ]
FYI, 2002 model IS200 does have H3 bulbs for front fog lights and not HB4 as mentioned in the chart. (should probably fix this in the original message)
Offline Profile Quote Post Goto Top
 
Stephen
Member Avatar
Altezza Club of Australia
[ *  *  *  *  *  *  *  *  * ]
Depends on the month in 2002. I believe there was a change over in the front fog lamp bulbs.
Posted Image
Offline Profile Quote Post Goto Top
 
sslc
Stock
[ *  * ]
Mines late 2002 (Aug) I think. So this must have been the change over. (I went and bought HB4's and then found out they were H3's)
Offline Profile Quote Post Goto Top
 
sslc
Stock
[ *  * ]
Hi, Sorry to be a pain, but as I'm upgrading all my front lights, I've got high, low, fogs sorted, whoever when you turn your lights to the first slot, there is a small light that comes on (in the low beam reflector area). What is this bulb? This is the only light that I have thats still a yellow-ish colour
Offline Profile Quote Post Goto Top
 
Stephen
Member Avatar
Altezza Club of Australia
[ *  *  *  *  *  *  *  *  * ]
That's the parking lamps. They are T10 wdge bulbs. Go LED for these :)

Same type as the side indicators and rear number plate lamp.
Posted Image
Offline Profile Quote Post Goto Top
 
sslc
Stock
[ *  * ]
Thanks Stephen, your a legend. Any recommendations on the LED.
The SMD's won't look good as the globe is visible. THere are other LEDs e.g:
http://cgi.ebay.com/2-X-T10-194-168-501-Wh...=item1e592ce544

What do you think of these?
Offline Profile Quote Post Goto Top
 
Stephen
Member Avatar
Altezza Club of Australia
[ *  *  *  *  *  *  *  *  * ]
Those look like standard LEDs inside. Don't think they would be bright enough.

I'm using PIAA LEDs for the front parkers. I used generic ones before and they did not last - they started to flash when they failed ;)
Posted Image
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
Go to Next Page
« Previous Topic · Interior Exterior · Next Topic »
Add Reply