| Welcome to Altezza Club Of NZ/Australia. We hope you enjoy your visit. You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free. http://s4.zetaboards.com/lexusaltezzaclub/topic/1148393/1/#new |
| $100 Simota Intake + Filter For Altezza (trademe) | |
|---|---|
| Tweet Topic Started: Dec 12 2007, 09:16 AM (2,008 Views) | |
| Leiden | Dec 12 2007, 09:16 AM Post #1 |
![]()
NZ, Whangarei
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Just come accross this on trademe: http://www.trademe.co.nz/Trade-Me-Motors/C...n-131632542.htm Seems to have provision for the maf, could possibly extend intake with further piping to smoothen airflow over the sensor? Dunno, whats your take? |
| Project Thread | |
![]() |
|
| xero | Dec 12 2007, 11:29 AM Post #2 |
![]()
3X Repeat Offender
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
unless you have an aftermarket ecu i wouldn't bother, pod's are bad news for altezza's, your std box will be far better with just a decent panel filter |
| |
![]() |
|
| altezza_nz | Dec 12 2007, 12:16 PM Post #3 |
![]()
97 Hilux
![]() ![]() ![]() ![]() ![]()
|
I'm running a simota pod filter on mine and have had no problems with it. My pipe is longer and curved. Here's a pic
|
| Researching itbs and vtec killers for the mean n/a build | |
![]() |
|
| alimac | Dec 12 2007, 08:01 PM Post #4 |
|
Canterbury, NZ
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
I'm running a home made pipe with a pod, and just did 600 km on 45l of 98. I regularly get better than 600km to the fuel light on my dail open road commute, and no, I don't drive like a nana. I think Andrew may have just fitted one of those Simota kits, but I'm not sure. |
| Yellow RS200z 6MT | |
![]() |
|
| tomstezz | Dec 12 2007, 09:45 PM Post #5 |
|
Soccer Mom
![]() ![]() ![]()
|
could we see a picture of your setup alimac? still having problems with mine. |
![]() |
|
| Andrew | Dec 13 2007, 06:22 AM Post #6 |
|
Stock
![]() ![]() ![]() ![]()
|
Yeah I purchased one of those kits.![]() ![]() havent had much trouble with it, when I first put it on it bogged down at about 5000rpm, but after clean the sensor problem solved. Next plan to build the cold air box... |
![]() |
|
| alimac | Dec 13 2007, 07:43 PM Post #7 |
|
Canterbury, NZ
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Here's mine![]() Where the MAF sensor is attached there is a PVC elbow inside the main pipe that hte snsor goes through. |
| Yellow RS200z 6MT | |
![]() |
|
| 1 user reading this topic (1 Guest and 0 Anonymous) | |
| « Previous Topic · General Discussion · Next Topic » |






![]](http://z4.ifrm.com/static/1/pip_r.png)








8:34 PM Jul 11