Welcome Guest [Log In] [Register]
Welcome to Altezza Club Of NZ/Australia. We hope you enjoy your visit.


You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.

http://s4.zetaboards.com/lexusaltezzaclub/topic/1148393/1/#new



Username:   Password:
Add Reply
Mocal Oil Cooler Kit; Lexus IS200 Supercharger Cooler Kit
Topic Started: Apr 9 2010, 06:48 AM (1,936 Views)
dimis
Member Avatar
Stock
[ *  * ]
Today I received my new toy :rolleyes: The Mocal Oil Cooler Kit.

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

Tomorrow I will purchase the Motul 300V oil and the Mahle OC11 oil filter and on Saturday I will fit the kit and change the oil :D
Lexus IS200 TTE Supercharger

Offline Profile Quote Post Goto Top
 
Maccabro
Member Avatar
beached az!
[ *  *  *  * ]
it looks like it does but can you conferm if it has a vernatherm (oil thermostat) in the sandwich plate?

cool looking kit, would love to get my hands on one or a greddy one!
altezza 3sge + apexi ax53b60 turbo kit + cwest body kit/ bonnet + modelista angel eye HID head lights +18" enkei NT03 + zeal adjusties + ........................more!
Offline Profile Quote Post Goto Top
 
DR-JEKL
Drifter
[ *  *  *  *  *  *  * ]
How much are these going for?

The oil lines look like great quality with those AN fittings!
Posted Image

High End Stez: Eclipse AVN 6000 DLS Nobeliums 6.2 DLS Ultimate A3 & A4 amps (Active) JL Audio 10W7 Stinger pro cables TRD VER S Zorst, Full C West Bodykit (SOLD) BMW E92 335i owner now :)
Offline Profile Quote Post Goto Top
 
yojimbo
Member Avatar
Hidden Dragon
[ *  *  *  *  *  * ]
yeah just "bolt it all up"...

let me know how that goes.

sorry... /sarcasm.


Mocal core is good, a bit thinner than the greddy ones, has a better chance of fitting between your intercooler and a/c core.

sorry again... I'm in one of those moods.


:wacko:
Toyota Nats 5 x Top Toyota
Toymods Dyno Day 19 - Killerwatt King
Supra Dyno Day 2015 Outright HP and Torque
11.10@141.34mph (0-400m)
22.048@164mph (0-1000m)

Built by ...
JMR Race Engineering - Toyota Specialist
Offline Profile Quote Post Goto Top
 
dimis
Member Avatar
Stock
[ *  * ]
Yes it has a thermostat in the sandwichplate. Not shown well in the posted pics. I will install it above the fmic and front of the radiator like it is shown in the pic below:

Posted Image
Lexus IS200 TTE Supercharger

Offline Profile Quote Post Goto Top
 
dimis
Member Avatar
Stock
[ *  * ]
Today I got the new oil filter and the Motul 300V 10w40 Oil :)

Posted Image
Posted Image
Posted Image
Posted Image

I got the Mocal Oil Cooler Kit from Prolex for 120pounds. (reduced from 200pounds)
Lexus IS200 TTE Supercharger

Offline Profile Quote Post Goto Top
 
dimis
Member Avatar
Stock
[ *  * ]
Today i visited my mechanics workshop to install the oil cooler kit. Initially we deicided to mount the oil plate and find a good route for the oil hoses. Well our first impression was that with the TTE supercharger kit there is not much space left in the engine bay and the installation of the oil cooler kit would be not easy.

Posted Image

Trying to find the best suitable route for the oil lines:

Posted Image
Posted Image
Posted Image

Oil Cooler Plate:

Posted Image
Posted Image

Once we found the best route and installed the oil plate it was time to fit oil cooler.
Note: It was required to deform the oil deep stick of the engine in order the oil lines could attach the oil plate.

Posted Image
Posted Image

Lexus IS200 TTE Supercharger

Offline Profile Quote Post Goto Top
 
dimis
Member Avatar
Stock
[ *  * ]
for the correct installation of the oil cooler we had to consider also the position and fittings of the air diversion plate.

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

After the installation of the air cooler kit we just figured out that it was not the correct position because the grille could not be fitted correctly. The cooler had to be repositioned and the fittings had to be changed.

Posted Image
Posted Image
Posted Image

After 4,5 hours job was done ;)

Posted Image
Posted Image
Posted Image
Lexus IS200 TTE Supercharger

Offline Profile Quote Post Goto Top
 
dimis
Member Avatar
Stock
[ *  * ]
Ok i have a few questions and i need some help. I got the oil cooler kit not only to protect the engine from the warm weather in Greece during the summer period but also because i intend to fit soon an oil temp and oil pressure gauge on my triple gauge pod. The Mocal oil cooler kit has a sandwich plate without any ports to fit the pressure and temperature sensors. Does anyone have any suggestions what i can do in this case? I have read somewhere on the web that i can fit a t-piece section between the oil line and the sandwich plate. Will this work and is it a correct method or not?
Lexus IS200 TTE Supercharger

Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
ZetaBoards - Free Forum Hosting
Free Forums. Reliable service with over 8 years of experience.
Learn More · Sign-up Now
« Previous Topic · Engines • Intakes • Exhausts · Next Topic »
Add Reply