Welcome Guest [Log In] [Register]
Welcome to Altezza Club Of NZ/Australia. We hope you enjoy your visit.


You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.

http://s4.zetaboards.com/lexusaltezzaclub/topic/1148393/1/#new



Username:   Password:
Add Reply
Supercharging; 3sge mounting sc12 14
Topic Started: Jul 26 2010, 10:05 PM (846 Views)
evilmrk1
Member Avatar
Soccer Mom
[ * ]
hi im keen as on bolting a sc 12 or 14 on to my 3s i was wanting to no if anyone had done it and had pics to help me on mounting it cheers :D
RS200 6mt low n loud
Offline Profile Quote Post Goto Top
 
T
Member Avatar
Stock
[ *  * ]
forget about the sc12 it's too small.

there are 2 versions of the sc14 - basically there is the "1g type" & a diesel variety. bottom mounts vary quite a bit, as does the clutch mechanism.

yesterday I was going through a jap tuner mag & there are/were a couple of jap companies who were offering a supercharger kit for the sxe10. the supercharger in the kit looks very much like a sc14. all custom manifolding etc. pics showed it sitting directly under the inlet manifold - basically in the same place on the motor as the tte kit fits the supercharger on the 1g (but note it's on the exhaust side on the 1g)

get hold of "hyper rev" volume 98 (altezza vol.3) & it will show the kit.

i suspect if you obtained matching sc14 1g type mounts you could probably mock something up -will be a bit of work doing all the piping etc (i've done 3 4agze sc14 upgrades & they are a lot of work - i'd suspect that this would be a similar sort of thing.

so how are you going to control the clutch? you could use an aftermarket v-tec controller or similar i suppose....

T

Offline Profile Quote Post Goto Top
 
Maccabro
Member Avatar
beached az!
[ *  *  *  * ]
T,Jul 30 2010
06:25 PM
forget about the sc12 it's too small.

there are 2 versions of the sc14 - basically there is the "1g type" & a diesel variety. bottom mounts vary quite a bit, as does the clutch mechanism.

yesterday I was going through a jap tuner mag & there are/were a couple of jap companies who were offering a supercharger kit for the sxe10. the supercharger in the kit looks very much like a sc14. all custom manifolding etc.  pics showed it sitting directly under the inlet manifold - basically in the same place on the motor as the tte kit fits the supercharger on the 1g (but note it's on the exhaust side on the 1g)

get hold of "hyper rev" volume 98 (altezza vol.3) & it will show the kit.

i suspect if you obtained matching sc14 1g type mounts you could probably mock something up -will be a bit of work doing all the piping etc (i've done 3 4agze sc14 upgrades & they are a lot of work - i'd suspect that this would be a similar sort of thing.

so how are you going to control the clutch? you could use an aftermarket v-tec controller or similar i suppose....

T

blitz kits im pretty sure use a sc rootes type supercharger. but im pretty sure theyre only sc12 sized ones. an engine with one was for sale on trademe a while ago and the numbers on ther supercharger from when i asked were xxx c12 (x= numbers).


on another note i have a power enterprises supercharger kit sitting here at home bolted to a altezza 3sge engine.. i just have to fix the head gasket on the engine and i was going to sell it all ( unsure of the condition of the supercharger tho, but it feels ok).. it has a c-type rotrex friction drive centrifical superchager, the unit runs constantly and has no clutch on it. does about 7 psi by what ive found out.
altezza 3sge + apexi ax53b60 turbo kit + cwest body kit/ bonnet + modelista angel eye HID head lights +18" enkei NT03 + zeal adjusties + ........................more!
Offline Profile Quote Post Goto Top
 
evilmrk1
Member Avatar
Soccer Mom
[ * ]
oh cheers for the info would u want to sell the charger or mounts etc
RS200 6mt low n loud
Offline Profile Quote Post Goto Top
 
Maccabro
Member Avatar
beached az!
[ *  *  *  * ]
evilmrk1,Jul 30 2010
10:26 PM
oh cheers for the info would u want to sell the charger or mounts etc

um yeah not realy id rather try and sell the engine and supercharger kit together at first. i will think about it anyway and let you know.
altezza 3sge + apexi ax53b60 turbo kit + cwest body kit/ bonnet + modelista angel eye HID head lights +18" enkei NT03 + zeal adjusties + ........................more!
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Engines • Intakes • Exhausts · Next Topic »
Add Reply