Welcome Guest [Log In] [Register]
Welcome to Altezza Club Of NZ/Australia. We hope you enjoy your visit.


You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.

http://s4.zetaboards.com/lexusaltezzaclub/topic/1148393/1/#new



Username:   Password:
Add Reply
Beams Wont Start
Topic Started: Sep 26 2010, 10:06 PM (635 Views)
ke_70
Stock
[ *  * ]
been tyring to start the beams up all day today and have got no where

it keeps backfiring and im not sure why? using an adaptronic ecu with loom off the same running setup and tune

i have changed the computer loom though

ive taken out the fuel pump from the adaptronic loom and wired into the body loom so i can switch on when ever
ive also wired out the thermo fan for the adaptronic loom so i can switch it on at will
pretty sure none of this will stop it from starting

all coils have spark and all spark plugs are sparking

open to any suggestions

thanks!
Offline Profile Quote Post Goto Top
 
Celica RA45
Lowered
[ *  *  * ]
try changing the firing by 360 degress
Offline Profile Quote Post Goto Top
 
ke_70
Stock
[ *  * ]
Celica RA45,Sep 26 2010
10:45 AM
try changing the firing by 360 degress

umm how do i do that?
im a little new with these new engines

whats the firing order on these?
Offline Profile Quote Post Goto Top
 
cpufix
Member Avatar
Paraparaumu, Wellington
[ *  *  *  *  *  * ]
ke_70,Sep 26 2010
10:06 PM
been tyring to start the beams up all day today and have got no where

it keeps backfiring and im not sure why? using an adaptronic ecu with loom off the same running setup and tune

i have changed the computer loom though

ive taken out the fuel pump from the adaptronic loom and wired into the body loom so i can switch on when ever
ive also wired out the thermo fan for the adaptronic loom so i can switch it on at will
pretty sure none of this will stop it from starting

all coils have spark and all spark plugs are sparking

open to any suggestions

thanks!

Has its actually started on this adaptronic ECU you say its been tuned.
So if it did run whats then been changed.

Fuel pump wiring could be a clue, fans should not upset things.
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Engines • Intakes • Exhausts · Next Topic »
Add Reply