Welcome Guest [Log In] [Register]
Welcome to Altezza Club Of NZ/Australia. We hope you enjoy your visit.


You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.

http://s4.zetaboards.com/lexusaltezzaclub/topic/1148393/1/#new



Username:   Password:
Add Reply
Std Black Top With Bolt Ons; altezza 3sge std tune with m800 motec
Topic Started: Feb 12 2011, 03:42 PM (1,919 Views)
Celica RA45
Lowered
[ *  *  * ]
Well i decided to tune a std motor that has done 16 kay. Motor was out of a 2003 model .

I used 1 of my inlets, my throttles 48mm, and a set of trd race pipes .

2 stage injection as well so with 8 injectors all up

At the end of the day with using 100octane pump fuel i ended up with 156kws at the back wheels on the chassis dyno that i use all of the time.

156kws at 7600 at 8000 power was done to 152, kept red line at 8000.

This motor makes power and torque earlier by say 1500 rpm than my race motor, as torque finishes at 6300 rpm. My race motor only catches up with this by 6000 rpm as in power, and also finishes power at 9000 rpm and torque on race motor finishes at 8000.

What i know is that the race pipes are worth 15kws, the 2 stage is worth 12 kws right across the rev range and the throttles also make a bit of power as well.

A std motor on this dyno was 120 kws and a red top fwd is about 115
Offline Profile Quote Post Goto Top
 
Major Clod
Soccer Mom
[ * ]
Mate, do you have the length of the primaries and secondaries on those trd pipes?

Love to get a similar set made up as I don't think they'll fit straight in to my ra23, and it would be an expensive exercise to buy some just to find out!

Look like they are the way to go. Nice results.
Offline Profile Quote Post Goto Top
 
greeneyes
Member Avatar
Targa Master
[ *  *  *  *  *  *  *  *  * ]
Great work!

That is solid information on what works and how well it does it. Would you describe the car as "road-quiet" with the exhaust setup you had?

An extra 30KW without touching the cams is an excellent result!
The Girl's KE70-
http://www.rollaclub.com/board/topic/42407-the-girls-ke70/
How NOT to build a rally car-
http://www.rollaclub.com/board/topic/64027...ld-a-rally-car/
Offline Profile Quote Post Goto Top
 
nz_climber
Lowered
[ *  *  * ]
Nice, will have to start saving for this once I get my car on the road..
Building a Beams 3sge powered Mcgregor 7.

Check out progress (or lack of..) at http://www.lotus7.co.nz/forum/viewtopic.ph...957eb3663a85224
Offline Profile Quote Post Goto Top
 
E910
Member Avatar
MOTUL 300V
[ *  *  *  *  *  * ]
Very nice set up. As Greeneys said, it's good to see what actually works. Now if only I had the coin to spare I'd be coming to see you.
アルテッツァ RS200-Z 6MT
Posted Image
Offline Profile Quote Post Goto Top
 
Celica RA45
Lowered
[ *  *  * ]
the dearest part would be the motec m800 to run the 8 injectors ,but i say the link would be good as well as long as you have 8 injector drivers it would be sweet
Offline Profile Quote Post Goto Top
 
War_Machine
Stock
[ *  * ]
Hey mate,

Maybe you could put up prices, for each mod you did to the engine so people will know how much it will all cost.

Just a suggestion, no offence intended. I want to something similar to a BEAMS engine that I want to run in my AE86, minus the Stage2 injection.

Those are some solid numbers with no port work and no cams

Cheers
Offline Profile Quote Post Goto Top
 
Celica RA45
Lowered
[ *  *  * ]
ok TRD race pipes if you can get them were 1900 landed in OZ

2 stage setup is 1200 all up this includes fuel rail and supports and ramtubes and 4x injector holders that bolt to throttles

quad throttle set up complete ,inlet /4 throttles /tps/cp linkage nuts and gaskets etc 2600
all in aussie money plus postage ,so not cheap in any way
plus m800 motec 3500 plus .loom /and cam control etc add another 1000 for the upgrades
Offline Profile Quote Post Goto Top
 
nz_climber
Lowered
[ *  *  * ]
ahh a classic case of if you have to ask how much, you can't afford it :) (I know I can't at the moment)

Forgot to add tuning/dyno time to the costs.
Building a Beams 3sge powered Mcgregor 7.

Check out progress (or lack of..) at http://www.lotus7.co.nz/forum/viewtopic.ph...957eb3663a85224
Offline Profile Quote Post Goto Top
 
War_Machine
Stock
[ *  * ]
Yeah I know, but gives you an idea of how much power you can get on your budget.
Offline Profile Quote Post Goto Top
 
alexlegault
Soccer Mom
[ * ]
would the g4 extreme be able to run 8 inuectors with vvti for cheaper??? what are the limitations of the g4
Offline Profile Quote Post Goto Top
 
Celica RA45
Lowered
[ *  *  * ]
you need a ecu that has 8 injector drivers to run a v8 so you can then have 2 injection tables
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Engines • Intakes • Exhausts · Next Topic »
Add Reply