Welcome Guest [Log In] [Register]
Welcome to Altezza Club Of NZ/Australia. We hope you enjoy your visit.


You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.

http://s4.zetaboards.com/lexusaltezzaclub/topic/1148393/1/#new



Username:   Password:
Add Reply
Sxe10 Turbo - Information Please!; Looking to change but what will fit?
Topic Started: May 22 2011, 03:15 PM (3,707 Views)
4TEZNU
Member Avatar
Stock
[ *  * ]
I inquired about them but nah im not going to going to use a gready, do you mean change the gaskets to change the compression? What power are you getting out of yours?

Yes live in palmy

Can you give me a link to the fuel pump to buy? Got 540cc injectors already
1999 Toyota Altezza RS200 6MT - Blue

19" Konig Hotwaps, LSD, HKS Headers, TRD Engine Cover, HKS Performance Exhaust, Exedy HD Clutch & Single Mass Flywheel

Offline Profile Quote Post Goto Top
 
Maccabro
Member Avatar
beached az!
[ *  *  *  * ]
4TEZNU,May 27 2011
09:40 PM
I inquired about them but nah im not going to going to use a gready, do you mean change the gaskets to change the compression? What power are you getting out of yours?

Yes live in palmy

Can you give me a link to the fuel pump to buy? Got 540cc injectors already

yes, changing gaskets to lower compression. im only getting 180 rwkw on 5psi at the mo but the cars running rich, mine needs decompressing and re- tuneing.

will try find a link for the fuell pump and post it up for you.

altezza 3sge + apexi ax53b60 turbo kit + cwest body kit/ bonnet + modelista angel eye HID head lights +18" enkei NT03 + zeal adjusties + ........................more!
Offline Profile Quote Post Goto Top
 
4TEZNU
Member Avatar
Stock
[ *  * ]
What compression should be running? I believe i have 11:5:1 at the moment, i think 180rwkw is amazing! Must give a hell of a kick! I really want 200 rwkw and running 10psi, do you have a dyno sheet?

Is there any reason you chose a apexi power fc?
1999 Toyota Altezza RS200 6MT - Blue

19" Konig Hotwaps, LSD, HKS Headers, TRD Engine Cover, HKS Performance Exhaust, Exedy HD Clutch & Single Mass Flywheel

Offline Profile Quote Post Goto Top
 
4TEZNU
Member Avatar
Stock
[ *  * ]
Also is there any reason for only using a 255hp fuel pump, as i had a quick look on trade me and theres heaps of 500hp ones.

What about this one?

http://www.trademe.co.nz/motors/car-parts-...n-379156025.htm
1999 Toyota Altezza RS200 6MT - Blue

19" Konig Hotwaps, LSD, HKS Headers, TRD Engine Cover, HKS Performance Exhaust, Exedy HD Clutch & Single Mass Flywheel

Offline Profile Quote Post Goto Top
 
Maccabro
Member Avatar
beached az!
[ *  *  *  * ]
4TEZNU,May 28 2011
10:49 AM
Also is there any reason for only using a 255hp fuel pump,

no, you got it wrong, 255 litres per hour i was saying, they are rated to support 500hp

yes i got a dyno sheet but i dont got anyway of putting it on here.
and no not that pump but similar.
altezza 3sge + apexi ax53b60 turbo kit + cwest body kit/ bonnet + modelista angel eye HID head lights +18" enkei NT03 + zeal adjusties + ........................more!
Offline Profile Quote Post Goto Top
 
Maccabro
Member Avatar
beached az!
[ *  *  *  * ]
http://www.trademe.co.nz/motors/car-parts-...n-378669638.htm



http://www.trademe.co.nz/motors/car-parts-...n-378911275.htm

im pretty sure its the gss342 one you want.

and somewhere on here is a thread all about installing them properly too. you have to use the filter off the bottom of the factory pump for the walbro to fit as they are slightly longer than the factory one and you leave out the rubber isolator. i would recomend renewing the main fuel filter in the pump cradle too.


you could also use a factory supra twin turbo fuel pump or go down the expensive route and go for a sard intank pump at about twice the cost of a walbro.
altezza 3sge + apexi ax53b60 turbo kit + cwest body kit/ bonnet + modelista angel eye HID head lights +18" enkei NT03 + zeal adjusties + ........................more!
Offline Profile Quote Post Goto Top
 
4TEZNU
Member Avatar
Stock
[ *  * ]
I had a quick look and couldn't find the thread you were referring to, could you please?

Also you just change the gaskets on where the turbo bolt on ae? Not the head gaskets?

Whats an ideal thickness for that to get lower compression?

Your Power FC is standalone right?

Did you need to repipe your exhaust system? If so what was done to make it work?

Do you have any other tips?

Cheers
1999 Toyota Altezza RS200 6MT - Blue

19" Konig Hotwaps, LSD, HKS Headers, TRD Engine Cover, HKS Performance Exhaust, Exedy HD Clutch & Single Mass Flywheel

Offline Profile Quote Post Goto Top
 
Higgsy
Member Avatar
Joining the wagon club
[ *  *  *  *  *  * ]
would love to see a step by step for the 3sge turbo setup.
have been considering it quietly in my corner down here.
make a vip garage and show us all the details
from a beams ITB to a 2JZ
Offline Profile Quote Post Goto Top
 
4TEZNU
Member Avatar
Stock
[ *  * ]
Yeah me too, leiden has a pinned topic but again the information is a bit old, I will make one as soon as mines turbo.

Cheers
1999 Toyota Altezza RS200 6MT - Blue

19" Konig Hotwaps, LSD, HKS Headers, TRD Engine Cover, HKS Performance Exhaust, Exedy HD Clutch & Single Mass Flywheel

Offline Profile Quote Post Goto Top
 
Maccabro
Member Avatar
beached az!
[ *  *  *  * ]
4TEZNU,May 28 2011
06:56 PM
I had a quick look and couldn't find the thread you were referring to, could you please?

Also you just change the gaskets on where the turbo bolt on ae? Not the head gaskets?

Whats an ideal thickness for that to get lower compression?

Your Power FC is standalone right?

Did you need to repipe your exhaust system? If so what was done to make it work?

Do you have any other tips?

Cheers

you will have to change your head gasket to lower the compression. people on here have staked 2 factory gaskets and are getting about 10.5-1 comprssion , i was considering 3 headgaskets that would give a compression of around 9.5-1 or a steel spacer plate made up and sandwiched between 2 gaskets and then you can control your compression ratio by the thickness of the spacer plate, (thats the oldskool way of doing it).

yes my power fc is standalone strait plug in :) .... there one for sale on trademe at the mo. roskilda have the software to tune it.

my turbo kits exhaust down pipe bolted strait up to my centre pipe no no modification was needed and my exhaust was already a aftermarket trust one.


other tips would be use a tube and fin intercooler not a bar and plate as they are heavy and restrictive compared to a tube and fin and get toda valve springs if you want to run over 10psi safley without getting valve float.
altezza 3sge + apexi ax53b60 turbo kit + cwest body kit/ bonnet + modelista angel eye HID head lights +18" enkei NT03 + zeal adjusties + ........................more!
Offline Profile Quote Post Goto Top
 
4TEZNU
Member Avatar
Stock
[ *  * ]
Yeah I seen that one on trade me I will buy it as I would rather have a stand alone.

I will try find a second gasket to run the lower compression, know of anyone who has one?

Last question, the exhaust headers have a o2 sensor on them, do I need to put that on the turbo or what?

Thanks
1999 Toyota Altezza RS200 6MT - Blue

19" Konig Hotwaps, LSD, HKS Headers, TRD Engine Cover, HKS Performance Exhaust, Exedy HD Clutch & Single Mass Flywheel

Offline Profile Quote Post Goto Top
 
4TEZNU
Member Avatar
Stock
[ *  * ]
Oh and do your trc control and snow buttons work with the apexi power fc?
1999 Toyota Altezza RS200 6MT - Blue

19" Konig Hotwaps, LSD, HKS Headers, TRD Engine Cover, HKS Performance Exhaust, Exedy HD Clutch & Single Mass Flywheel

Offline Profile Quote Post Goto Top
 
Maccabro
Member Avatar
beached az!
[ *  *  *  * ]
4TEZNU,May 28 2011
10:55 PM
Yeah I seen that one on trade me I will buy it as I would rather have a stand alone.

I will try find a second gasket to run the lower compression, know of anyone who has one?

Last question, the exhaust headers have a o2 sensor on them, do I need to put that on the turbo or what?

Thanks

yeah the power fc would be the way to go.

email nick at northshore toyota or go to manawatu toyota and get 2 head gaskets.

it should be put back into your new turbo down pipe in about the similar place to it was factory.

what turbo kit are you getting? it should have a down pipe included if its a greddy one.
altezza 3sge + apexi ax53b60 turbo kit + cwest body kit/ bonnet + modelista angel eye HID head lights +18" enkei NT03 + zeal adjusties + ........................more!
Offline Profile Quote Post Goto Top
 
Maccabro
Member Avatar
beached az!
[ *  *  *  * ]
4TEZNU,May 28 2011
11:10 PM
Oh and do your trc control and snow buttons work with the apexi power fc?

trc works but snow mode doesnt seem to anymore but i never use it and dont plan to so it doesnt worry me.
altezza 3sge + apexi ax53b60 turbo kit + cwest body kit/ bonnet + modelista angel eye HID head lights +18" enkei NT03 + zeal adjusties + ........................more!
Offline Profile Quote Post Goto Top
 
Maccabro
Member Avatar
beached az!
[ *  *  *  * ]
Maccabro,May 27 2011
06:26 PM
xnickx,May 25 2011
12:05 AM

Fortec Performance
56 Taonui Street
Palmerston North 4410
(06) 355-2396





i havent heard of this place in palmy, might have to check them out.

i drove past 56 taonui st and it appers they are not there some other busness is there.
altezza 3sge + apexi ax53b60 turbo kit + cwest body kit/ bonnet + modelista angel eye HID head lights +18" enkei NT03 + zeal adjusties + ........................more!
Offline Profile Quote Post Goto Top
 
Maccabro
Member Avatar
beached az!
[ *  *  *  * ]
4TEZNU,May 28 2011
06:56 PM
I had a quick look and couldn't find the thread you were referring to, could you please?


http://z4.invisionfree.com/lexusaltezzaclu...?showtopic=9826
altezza 3sge + apexi ax53b60 turbo kit + cwest body kit/ bonnet + modelista angel eye HID head lights +18" enkei NT03 + zeal adjusties + ........................more!
Offline Profile Quote Post Goto Top
 
4TEZNU
Member Avatar
Stock
[ *  * ]
Thanks for that. I have successfully got everything now, I will be ringing up Roskila autos to do a dyno tune of my altezza!

How much did they charge you?

Heres what I have:

Complete turbo kit & already tunned e manage ultimate however may buy the apexi if needed.

Includes:

Turbo
Down Pipe
Manifold
Oil & Water Lines
Intercooler
Intercooler Piping

540CC injectors

550hp Walbro fuel pump

Do I need to get anything else? Other than head gasket? Quick question you can stack two right... can I use the one I already have and just buy a second one?

Thanks, also you were getting 180rwkw on just the turbo kit running 6 psi & fuel pump? No other mods?

What can I expect doing the injectors and lowering the compression?

Thanks
1999 Toyota Altezza RS200 6MT - Blue

19" Konig Hotwaps, LSD, HKS Headers, TRD Engine Cover, HKS Performance Exhaust, Exedy HD Clutch & Single Mass Flywheel

Offline Profile Quote Post Goto Top
 
12die4
Member Avatar
Mike
[ *  *  * ]
Guy I sold mine to made 270hp atw with the mods you have mentioned. He's stacking gaskets hoping to make 300hp then in a few months forging internals.. Buy new gaskets aswell
Turbo 3sge
Offline Profile Quote Post Goto Top
 
Maccabro
Member Avatar
beached az!
[ *  *  *  * ]
4TEZNU,May 29 2011
10:29 PM
Thanks for that. I have successfully got everything now, I will be ringing up Roskila autos to do a dyno tune of my altezza!

How much did they charge you?

Heres what I have:

Complete turbo kit & already tunned e manage ultimate however may buy the apexi if needed.

Includes:

Turbo
Down Pipe
Manifold
Oil & Water Lines
Intercooler
Intercooler Piping

540CC injectors

550hp Walbro fuel pump

Do I need to get anything else? Other than head gasket? Quick question you can stack two right... can I use the one I already have and just buy a second one?

Thanks, also you were getting 180rwkw on just the turbo kit running 6 psi & fuel pump? No other mods?

What can I expect doing the injectors and lowering the compression?

Thanks

never ever reuse a headgasket man! you need two new ones and yes stack them. maybe buy new headbolts from toyota or get some ARP studs...they are way more superior!
altezza 3sge + apexi ax53b60 turbo kit + cwest body kit/ bonnet + modelista angel eye HID head lights +18" enkei NT03 + zeal adjusties + ........................more!
Offline Profile Quote Post Goto Top
 
4TEZNU
Member Avatar
Stock
[ *  * ]
Thanks for that 12die4, got another question, stacking the gaskets lowers compression, will that make the car very slow untill the turbo kicks in?

And thanks for all your help maccabro, much appreciated
1999 Toyota Altezza RS200 6MT - Blue

19" Konig Hotwaps, LSD, HKS Headers, TRD Engine Cover, HKS Performance Exhaust, Exedy HD Clutch & Single Mass Flywheel

Offline Profile Quote Post Goto Top
 
xnickx
Member Avatar
^^ You may thank me ^^
[ *  *  *  *  *  *  *  *  * ]
Stacking 2 0.8mm OEM gaskets will lower it to approx 10.5:1.

Look at it this way, a standard 3SGTE (1st and 3rd Gen) are only 8.5:1
Contacting me for parts

Posted Image

Posted Image
Offline Profile Quote Post Goto Top
 
peanut
Member Avatar
Red Horns Devil
[ *  *  *  *  *  * ]
how many can u stack while it is still classified as safe? lol
For Vinyl Car Wrapping solutions and CarbonFiber parts email:adam@modbox.works
Offline Profile Quote Post Goto Top
 
4TEZNU
Member Avatar
Stock
[ *  * ]
xnickx,May 30 2011
06:58 PM
Stacking 2 0.8mm OEM gaskets will lower it to approx 10.5:1.

Look at it this way, a standard 3SGTE (1st and 3rd Gen) are only 8.5:1

Have to confess, I still don't understand? Nick can you PM me the VIP price for two gaskets? Cheers
1999 Toyota Altezza RS200 6MT - Blue

19" Konig Hotwaps, LSD, HKS Headers, TRD Engine Cover, HKS Performance Exhaust, Exedy HD Clutch & Single Mass Flywheel

Offline Profile Quote Post Goto Top
 
4TEZNU
Member Avatar
Stock
[ *  * ]
Does anyone know of a cool BOV? like a nice sounding one
1999 Toyota Altezza RS200 6MT - Blue

19" Konig Hotwaps, LSD, HKS Headers, TRD Engine Cover, HKS Performance Exhaust, Exedy HD Clutch & Single Mass Flywheel

Offline Profile Quote Post Goto Top
 
Maccabro
Member Avatar
beached az!
[ *  *  *  * ]
4TEZNU,May 30 2011
08:31 PM
Does anyone know of a cool BOV? like a nice sounding one

greddy type rs or blitz super sound.
altezza 3sge + apexi ax53b60 turbo kit + cwest body kit/ bonnet + modelista angel eye HID head lights +18" enkei NT03 + zeal adjusties + ........................more!
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
Go to Next Page
« Previous Topic · Engines • Intakes • Exhausts · Next Topic »
Add Reply